Box Tracker v2
 
Default group
  • Access
  • Connect
  • GPS Data Logging
  • Input / Output
  • Geofence
  • Driver ID / Immobiliser
  • RS232 Commands
GPRS
GPRS APN
GPRS Username
GPRS Password
Primary server
Address
Port
Password
Secondary server
Address
Port
Password
Access
Password required on
RS232
GSM
 
USB
SMS
Password
Squarell file
Connections
Enable permanent TCP connection
Send SIM number on each connection
Upload logs
On Ignition ON, every
seconds
On Ignition OFF, every
minutes
On external power OFF, every
minutes
When distance between uploads exceeds
km
On heading change
Digital inputs
Connect
Digital 0
Digital 1
Digital 2
SMS
SMS phone number
Include header information
Always send following events via SMS
Send following event via SMS if GPRS fails
Firmware update
Check frequency every
days
GPS location
On Ignition ON, every
seconds
On Ignition OFF, every
minutes
Distance travelled exceeds
km
External power OFF, every
minutes
Heading change exceeds
degrees
Create log every
minutes
Gps logs contain
Driver behaviour
Journey distance exceeds
km
Journey time exceeds
minutes
Speed exceeds
km/h for
seconds
Movement since idle exceeds
seconds
Idle time exceeds
minutes
Harsh braking exceeds
m/s/s
Harsh acceleration exceeds
m/s/s
Force exceeds (Ignition OFF)
g
Force exceeds (Ignition ON)
g
Privacy
Log GPS location information in private journey mode
Analogue inputs
 
Calibration factor
Log input
Analogue 0
 
Analogue 1
 
Analogue 2
 
External battery voltage
Digital inputs
Debounce
Log time in state
Digital 0
Digital 1
Digital 2
Pulse counters
Enable counter
Pulse counter 0
 
Pulse counter 1
 
Pulse counter 2
External outputs
Enable output
5V
Equipment
Vehicle battery
Enable panic button on Digital Input 0
Enable tracker power switch
Charge unit when ignition OFF
Geofences
Format: <1>,<alarm_entry>,<alarm_exit>,<latitude>,<longitude>,<radius>
To configure a geofence with the following paramters: Alarm on entry, no alarm on exit, at GPS location: 53.58688, -2.40346 with a 1.5 km radius:
1,1,0,53.58688,-2.40346,1.5
(Enter 1 geofence per line)
Driver ID
Private keys
Business keys
(Enter 1 key per line)
Always validate key
Driver key timeout period
seconds
Immobilisation
Immobiliser
Action
Driver behaviour
Feedback buzzer duration
seconds
Feedback buzzer events
Privacy
Enable Private Mode
Equipment
Enable CAN
Enable RS232 Echo
Send to RS232 port
Map Commands
Map 1
Map 2
Map 3
Map 4
Map 5
Map 6
Map 7
Map 8
Map 9
Map 10